Description "Robbe Modellsport RO-POWER ULTRA MAXAMP 5000MAH 22,2 VOLT LIPO Battery XT-90"
Please note that the shipment of LiPo's over 100Wh/or single cell from 20Wh is only possible to Austria and Germany via GLS. Expedited shipments (EMS) are not possible, nor is payment by cash on delivery in Germany. There is a € 9.90 postage fee per shipment.
The new Robbe Ro-Power ULTRA HP and MAXAMP are selected high-performance cells with a novel chemical structure. They have a very low internal resistance and maintain their voltage even under high loads. It goes without saying that the packs are manufactured to the highest quality standards and are manufactured to the highest standards and carefully selected best components.
Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.
The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.
The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.
The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series.
Thus we can also guarantee a very high cycle stability. The discharge currents (C-rates) are deliberately kept very conservative and can therefore be removed permanently.
The ULTRA HP series is made with 25(50)C for all standard requirements in the entire RC range.
The MAXAMP series has an even higher load capacity of 35(70)C and is used in the high performance range, where higher currents and voltage stability under load are required.
The relatively low weight is another advantage of the Robbe Ro-Power ULTRA series.
Technical data
Capacity (mAh): | 5000 |
---|---|
Voltage (V): | 22,2 |
Weight (g): | 675 |
Length (mm): | 140 |
Type: | LiPo |
Form: | 6S |
Wide (mm): | 43 |
Discharge current (C): | 35(70) |
Height (mm): | Without plug |
Connection: | XT-90 |
Balancer plug: | XH |
Login