| Capacity (mAh): | 3400 |
|---|---|
| Number of cells: | 6S |
| Voltage (V): | 22,2 |
| Weight (g): | 494 |
| Length (mm): | 138,0-139,0 |
| Type: | LiPo |
| Width (mm): | 43,8-49,0 |
| Discharge current (C): | 35(70) |
| Height (mm): | 39,0-40,8 |
| Connection: | XT-90 |
| Balancer plug: | XH |
| AT | DE | CH | FR | IT | ES | NL | CZ | SK | HU |
| BE | BG | DK | SK | SI | GR | GB | HR | LU | NO |
The relatively low weight is a further advantage of the Robbe Ro-Power ULTRA series.
The ULTRA HP series, with a C-rate of 25(50)C, is designed to meet all standard requirements across the entire RC sector.
The MAXAMP series, with a 35(70)C rating, can handle significantly higher loads and is used in high-performance applications where higher currents and voltage stability under load are required.
Note: the dimensions and weights specified correspond to measurements taken from several batteries of the same type. These values are, by their very nature, subject to normal manufacturing variations!
Furthermore, upon more precise measurement, most batteries are not symmetrical and exhibit different dimensions in areas such as the cable terminals compared to the rest of the battery. Similarly, the batteries are often not exactly identical in thickness or height!
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]
Robbe Modellsport RO-POWER ULTRA MAXAMP 3400MAH 22,2 VOLT
€68.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
| Capacity (mAh): | 3400 |
|---|---|
| Number of cells: | 6S |
| Voltage (V): | 22,2 |
| Weight (g): | 494 |
| Length (mm): | 138,0-139,0 |
| Type: | LiPo |
| Width (mm): | 43,8-49,0 |
| Discharge current (C): | 35(70) |
| Height (mm): | 39,0-40,8 |
| Connection: | XT-90 |
| Balancer plug: | XH |
| AT | DE | CH | FR | IT | ES | NL | CZ | SK | HU |
| BE | BG | DK | SK | SI | GR | GB | HR | LU | NO |
The relatively low weight is a further advantage of the Robbe Ro-Power ULTRA series.
The ULTRA HP series, with a C-rate of 25(50)C, is designed to meet all standard requirements across the entire RC sector.
The MAXAMP series, with a 35(70)C rating, can handle significantly higher loads and is used in high-performance applications where higher currents and voltage stability under load are required.
Note: the dimensions and weights specified correspond to measurements taken from several batteries of the same type. These values are, by their very nature, subject to normal manufacturing variations!
Furthermore, upon more precise measurement, most batteries are not symmetrical and exhibit different dimensions in areas such as the cable terminals compared to the rest of the battery. Similarly, the batteries are often not exactly identical in thickness or height!
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]