• innovative RC products
  • fast delivery
  • 96 years Robbe

Capacity (mAh): 5200
Number of cells: 6S
Voltage (V): 22,2
Weight (g): 698,5
Length (mm): 137,3
Type: LiPo
Width (mm): 42,3-48,8
Discharge current (C): 25(50)
Height (mm): 55,0-56,0
Connection: XT-90
Balancer plug: XH

Please note that the shipment of LiPo's over 100Wh/or single cell from 20Wh is only possible to Austria and Germany via GLS. Expedited shipments (EMS) are not possible, nor is payment by cash on delivery in Germany. There is a € 9.90 postage fee per shipment.

The new Robbe Ro-Power ULTRA HP and MAXAMP are carefully selected high-performance cells featuring an innovative chemical composition. They have very low internal resistance and maintain their voltage even under heavy loads. Naturally, the packs are manufactured to the highest standards of workmanship, using carefully selected top-quality components. This also enables us to guarantee very high cycle stability. The discharge currents (C-rates) have been deliberately set at very conservative levels and can therefore be drawn continuously.
The relatively low weight is a further advantage of the Robbe Ro-Power ULTRA series.
The ULTRA HP series, with a C-rate of 25(50)C, is designed to meet all standard requirements across the entire RC sector.
The MAXAMP series, with a 35(70)C rating, can handle significantly higher loads and is used in high-performance applications where higher currents and voltage stability under load are required.

Note: the dimensions and weights specified correspond to measurements taken from several batteries of the same type. These values are naturally subject to normal manufacturing variations!

Furthermore, upon more precise measurement, most batteries are not symmetrical and exhibit different dimensions in areas such as the cable terminals compared to the rest of the battery. Similarly, the batteries are often not exactly identical in thickness or height!

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport RO-POWER ULTRA HP 5200MAH 22,2 VOLT 6S 25 (50)C LIPO BATTERY XT-90

Product number: 7349
Regular price:

€92.99

Only a few left in stock. Delivery time: 1–3 working days.

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Robbe Modellsport RO-SAFETY LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY

Sale price: €75.99 Regular price:€79.99(5% saved)
Robbe Modellsport Lipo Bag protective case ‘ROBBE’ 23x30cm

Regular price: €6.49
Robbe Modellsport RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY

Sale price: €134.99 Regular price:€139.99(3.57% saved)
Robbe Modellsport Ro-Heat 18x23cm 12V for LiPo batteries for preheating: heating bag

Sale price: €19.99 Regular price:€24.99(20.01% saved)
Robbe Modellsport Ro-Heat 23x30cm 12V for LiPo batteries for preheating: heating bag

Sale price: €23.99 Regular price:€29.99(20.01% saved)
Robbe Modellsport Lipoguard “L” Lipo bag approx. 215x155x110 High-quality design

Regular price: €19.99

Capacity (mAh): 5200
Number of cells: 6S
Voltage (V): 22,2
Weight (g): 698,5
Length (mm): 137,3
Type: LiPo
Width (mm): 42,3-48,8
Discharge current (C): 25(50)
Height (mm): 55,0-56,0
Connection: XT-90
Balancer plug: XH

Please note that the shipment of LiPo's over 100Wh/or single cell from 20Wh is only possible to Austria and Germany via GLS. Expedited shipments (EMS) are not possible, nor is payment by cash on delivery in Germany. There is a € 9.90 postage fee per shipment.

The new Robbe Ro-Power ULTRA HP and MAXAMP are carefully selected high-performance cells featuring an innovative chemical composition. They have very low internal resistance and maintain their voltage even under heavy loads. Naturally, the packs are manufactured to the highest standards of workmanship, using carefully selected top-quality components. This also enables us to guarantee very high cycle stability. The discharge currents (C-rates) have been deliberately set at very conservative levels and can therefore be drawn continuously.
The relatively low weight is a further advantage of the Robbe Ro-Power ULTRA series.
The ULTRA HP series, with a C-rate of 25(50)C, is designed to meet all standard requirements across the entire RC sector.
The MAXAMP series, with a 35(70)C rating, can handle significantly higher loads and is used in high-performance applications where higher currents and voltage stability under load are required.

Note: the dimensions and weights specified correspond to measurements taken from several batteries of the same type. These values are naturally subject to normal manufacturing variations!

Furthermore, upon more precise measurement, most batteries are not symmetrical and exhibit different dimensions in areas such as the cable terminals compared to the rest of the battery. Similarly, the batteries are often not exactly identical in thickness or height!

Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]