• innovative RC products
  • fast delivery
  • 96 years Robbe

Bearing: ohne
Servo Speed sec./60° (6V) HV: 0,11
Servo Speed sec./60° (7,4V) HV: 0,09
Servo Torque kg/cm (6V) HV: 3,5
Servo Torque kg/cm (7,4V) HV: 4
Gearbox Type: Metal
Weight (g): 20
Length (mm): 28
Width (mm): 13
Height (mm): 29,7
Servo-type: High Voltage
Gear tooth: 40Z/5,8mm
Betriebspannung (V) HV: 6,0 - 7,4

The FS 277 MG HV is a part-metal gearbox servo of the upper middle class with 4kg actuating force. It is designed for HV operation with 2S LiPo batteries and thus meets modern requirements. Like its predecessor FS 270, it is suitable for larger gliders where space is limited but high forces and robustness are required. The gearbox and the reset accuracy have been significantly improved.

NOTE: the servo has 40T fine toothing with a diameter of 5.8mm on the output gear!





Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport FS 277 MG HV digital Servos

Product number: 9115
Regular price:

€15.99

No longer available

Privacy
By selecting continue you confirm that you have read our and accepted our .

Bearing: ohne
Servo Speed sec./60° (6V) HV: 0,11
Servo Speed sec./60° (7,4V) HV: 0,09
Servo Torque kg/cm (6V) HV: 3,5
Servo Torque kg/cm (7,4V) HV: 4
Gearbox Type: Metal
Weight (g): 20
Length (mm): 28
Width (mm): 13
Height (mm): 29,7
Servo-type: High Voltage
Gear tooth: 40Z/5,8mm
Betriebspannung (V) HV: 6,0 - 7,4

The FS 277 MG HV is a part-metal gearbox servo of the upper middle class with 4kg actuating force. It is designed for HV operation with 2S LiPo batteries and thus meets modern requirements. Like its predecessor FS 270, it is suitable for larger gliders where space is limited but high forces and robustness are required. The gearbox and the reset accuracy have been significantly improved.

NOTE: the servo has 40T fine toothing with a diameter of 5.8mm on the output gear!





Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]