GRAUPNER HVS 933 BB MG HIGH VOLTAGE DIGI SERVO
Product number:
7970
GTIN/EAN:
4013389443456
Description "GRAUPNER HVS 933 BB MG HIGH VOLTAGE DIGI SERVO"
Especially well suited for motor powered and glider aircraft models, helicopters, boat models, and RC cars.
Warning - Potential problems with this servo!
This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.
As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.
Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models.
The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.
FEATURES
- High-voltage, operating voltage up to 8.4V!
- Direct operation with 2-cell LiPo batteries
- Operating voltage range 4.8 ... 8.4 V
- Ball bearings
- Metal drive mechanism
Warning - Potential problems with this servo!
This servo features metal gears, and the potentiometer operating voltage is passed to the servo’s metal output shaft. If an aluminium control surface horn or a non-insulated RDS linkage is used with the servo, and if an electrically conductive contact with the airframe also exists - e.g. in an all-carbon model - the servos will interact with each, as the aforesaid voltage is transmitted between them. You can avoid this problem either by using a plastic control surface horn, or by insulating the servo mount in such a way that no electrical connection exists.
As manufacturer, Graupner/SJ GmbH recommends the exclusive use of accessories which have been tested and approved by Graupner/SJ, as this ensures that they are fit for purpose, work correctly and are safe. If you observe this advice, Graupner/SJ accepts liability to you for the product. Graupner/SJ is not in a position to assess the safety risk of every individual product made by other companies. For this reason we deny all liability If you use non-approved components, or accessories made by other manufacturers.
Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models.
The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.
FEATURES
- Digital servo featuring dynamic torque, excellent Speed, superior response and holding torque
- Programmable Digital Circuit and SMT circuitry
- 1024 high resolution
- Supporting 1-16µ depending on programming
- Supports a wide range of frame rates 20Hz-400Hz
- 10-bit processing circuit
Technical data
| BB: | •• |
|---|---|
| Gearbox Type: | Metal |
| Size (mm): | 32/16/33,5 |
| Servo Torque (7,4V): | 7,5 kg |
| Speed(40°): | 0,09 |
| Weight: | 29 g |
| Servo type: | High Voltage |
Graupner, based in Kirchheim, Germany, was founded by the family Graupner and, up until March 2013, operated under the third Graupner generation from Stefan Graupner. In March 2013, the company was purchased by the manufacturer of Graupner HoTT RC Transmitter Systems. Graupner covers a large RC assortment including RC Cars and Trucks (GM), Helicopters, Airplanes, RC Electronics (HoTT 2,4GHZ), Chargers, RC Glow-Powered Motors (OS) as well as a large variety of Electric-Powered Brushless Motors. Graupner supplies around 2000 retailers throughout the world.
Login