Skip to main content
innovative RC products
fast delivery
96 years Robbe

  • Kit


Dierser Fuselage Holder was developed for the usual fuselage cross-sections in the hood area of special purpose sailboats with spans from 2.5 meters to 4 meters. Due to the natural rubber casters and the multi-point rubber support, the hull is firmly positioned. Thus, all necessary activities in the hull boat or rear can be carried out optimally.There are combinations with the hull holder "M" or. Hull holder "S" conceivable. In addition, this assembly aid is also suitable for mobile use during model flight holidays, as well as for safe storage of your model aircraft in the home hangar.

Features:
  • Hull width: 30 - 75 mm
  • Dimensions (L/W/H): 105/50/100 mm


This hull or model holder is a smart solution to a vexing problem on the workbench or even when transporting round hulls. No more turning away and slipping off during maintenance and construction of such models. The opening width is variable over a wide range. Two can also be used. For example, a small holder at the stern and a larger one at the front for maximum stability. The rubbers also prevent slipping on the workbench. Supplied as a kit, which can be assembled in just a few steps. Notice. The legs are glued together. The small hole in which a toothpick can be used to help glue the individual legs together makes it easier to centre them neatly.

Details of the manufacturer (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport Fuselage holder type "L" up to approx. 65mm

Product number: 50615

€11.99*

% €14.99* (20.01% saved)

In stock. Usually ships within 1 business day.

  • Kit


Dierser Fuselage Holder was developed for the usual fuselage cross-sections in the hood area of special purpose sailboats with spans from 2.5 meters to 4 meters. Due to the natural rubber casters and the multi-point rubber support, the hull is firmly positioned. Thus, all necessary activities in the hull boat or rear can be carried out optimally.There are combinations with the hull holder "M" or. Hull holder "S" conceivable. In addition, this assembly aid is also suitable for mobile use during model flight holidays, as well as for safe storage of your model aircraft in the home hangar.

Features:
  • Hull width: 30 - 75 mm
  • Dimensions (L/W/H): 105/50/100 mm


This hull or model holder is a smart solution to a vexing problem on the workbench or even when transporting round hulls. No more turning away and slipping off during maintenance and construction of such models. The opening width is variable over a wide range. Two can also be used. For example, a small holder at the stern and a larger one at the front for maximum stability. The rubbers also prevent slipping on the workbench. Supplied as a kit, which can be assembled in just a few steps. Notice. The legs are glued together. The small hole in which a toothpick can be used to help glue the individual legs together makes it easier to centre them neatly.

Details of the manufacturer (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]