• innovative RC products
  • fast delivery
  • 96 years Robbe

- Model in full-GFK/CFK construction, multi-coloured lacquered in form
- various small parts
- Manual and German/English/French

Wing-span (mm): 1700
Flight weight approx. (g): 1350
Empty weight approx. (g): 550
Control: Ailerons, Elevator, Motor Powered
Length (mm): 900
Manufacturer: Robbe Modellsport
Fuselage: Carbon/FiberGlass
Wings: Fiberglass/Carbon
Rec. engine: X36-800
Rec. Battery: 4S/3200-4000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: MH-30
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.

With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.

Low overflights with high speed are spectacular and demonstrate the performance of the model.
"Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.

The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot.
"Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport LIMIT PRO ARF FULL GRP/CRP

Product number: 2642
Regular price:

€439.99

In stock. Usually ships within 1 business day.

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Robbe Modellsport RO-CONTROL 6-60 3-6S -60(80)A 5V/7A SWITCH BEC controller

Regular price: €38.99
Robbe Modellsport SERVO EXTENSION CABLE 0,3MM² 20 CM

Sale price: €1.99 Regular price:€2.99(33.44% saved)
Robbe Modellsport EXTENSION CABLE FUTABA 60CM 1PCS TWISTED 0,35MM² 22AWG

Regular price: €2.99
Robbe Modellsport RO-POXY 5 MINUTES EPOXY RESIN ADHESIVE 100G EACH 50G RESIN+HARDENER

Content: 0.1 kg (€119.90 / 1 kg)

Regular price: €11.99
Robbe Modellsport RO-POXY 10 MINUTES EPOXY RESIN ADHESIVE 90G EACH 45G RESIN+HARDENER

Content: 0.09 kg (€122.11 / 1 kg)

Regular price: €10.99
Robbe Modellsport Spinner 38mm with offset, black

Regular price: €16.99
Robbe Modellsport FS 155 BB MG DIGITAL SERVO

Regular price: €18.99
Robbe Modellsport RO-POWER TORQUE X-36 800 K/V Brushless Motor

Regular price: €99.99
Robbe Modellsport CHARGING CABLE XT-90 SILICONE 30CM 14AWG 1PC. with banana plug

Regular price: €5.99
Robbe Modellsport FS 155+ BB MG HV DIGITAL SERVO with soft start

Regular price: €19.99
Robbe Modellsport RO-POWER ULTRA HP 3300MAH 14,8 VOLT 4S

Regular price: €48.99
Robbe Modellsport RO-POWER ULTRA HP 4000MAH 14,8 VOLT 4S

Regular price: €53.99
Robbe Modellsport RO-POWER ULTRA MAXAMP 4200MAH 14,8 VOLT

Regular price: €55.99
Robbe Modellsport RO-CONTROL LITE programming card

Regular price: €12.99
Robbe Modellsport RO-CONTROL 6-80 2-6S -80(100A) BL CONTROLLER 5V/5A SWITCH-BEC

Regular price: €45.99
Robbe Modellsport RO-POWER ULTRA HP 3300MAH 14,8 VOLT 4S

Regular price: €48.99
Robbe Modellsport RO-POWER ULTRA MAXAMP 3400MAH 14,8 VOLT

Regular price: €46.99
Robbe Modellsport ALUMINIUM PROTECTIVE BAGS LIMIT PRO

Regular price: €49.99
Robbe Modellsport Ro-Spider center of gravity balance and Hull holder Multitool

Regular price: €99.99
Robbe Modellsport Lipoguard “L” Lipo bag approx. 215x155x110 High-quality design

Regular price: €19.99
Robbe Modellsport Fuselage LIMIT PRO WITHOUT ELECTRONICS

Regular price: €159.99
Robbe Modellsport AREA RATE LIMIT PERRF WITHOUT SERVOS

Regular price: €269.99
Robbe Modellsport VERTICAL STABILIZER LIMIT PER ARF

Regular price: €42.99
Robbe Modellsport Servo covers Surface Limit Pro GfK

Regular price: €14.99

- Model in full-GFK/CFK construction, multi-coloured lacquered in form
- various small parts
- Manual and German/English/French

Wing-span (mm): 1700
Flight weight approx. (g): 1350
Empty weight approx. (g): 550
Control: Ailerons, Elevator, Motor Powered
Length (mm): 900
Manufacturer: Robbe Modellsport
Fuselage: Carbon/FiberGlass
Wings: Fiberglass/Carbon
Rec. engine: X36-800
Rec. Battery: 4S/3200-4000mAh LiXX
Version: ARF - ALMOST READY TO FLY
Airfoil: MH-30
Flight Skill: Advanced
Build Skill: Advanced
Drive Type: Electric

The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.

With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.

Low overflights with high speed are spectacular and demonstrate the performance of the model.
"Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.

The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot.
"Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring.


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]