Skip to main content
innovative RC products
fast delivery
96 years Robbe

  • Ro-Control 8-120 V2
  • NO Plug battery side
  • Plug motor side: 4mm gold contact
  • printed manual in D
  • Instructions EN / FR for download


Cells (LiPo): 3-8
Current duration (A): 120
Max current (A): 150
Weight (g): 117
BEC: 5/6/7,4/8,4V / 10(30)A
Length (mm): 83
Type: Brushless
Wide (mm): 35
Height (mm): 22
BEC or OPTO: BEC

The Ro-Control V2 series has been further expanded with this new 120A controller. Numerous features such as the built-in 32-bit microprocessor, with a running frequency of up to 96 MHz, as well as programmable functions such as brake type, braking force, HV BEC output voltage, cut-off voltage, LiPo cell setting, start-up and search mode and, of course, timing and active freewheeling have been implemented.

Reverse brake
With activated reverse brake and linear reverse brake mode, the landing distance of the aircraft can be effectively shortened to simulate the landing of a real aircraft.
Normal Brake Mode and Brake Disabled Mode are also available;
In normal brake mode, the braking force is adjustable.

Of course, these controllers are also subject to strict quality assurance to ensure maximum safety and fun. The Ro-Control V2 controllers are particularly suitable for our Robbe ARF and PNP models, but also for many other aircraft.

Features

- Compatible with a wide range of brushless motors
- Integrated 32-bit microprocessor
- BEC voltage programmable 5V, 6V, 7.4V and 8.4V
- Equipped with DEO (Driving Efficiency Optimisation) technology to improve throttle response and reduce controller temperature
- Effectively reduce the landing distance of the aircraft with the programmable brake modes
- Various protection mechanisms such as undervoltage cut-off, overheating protection and throttle signal loss protection
- Simple programmeable with the LED programming card 8720 or by the transmitter


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]

Robbe Modellsport Ro-Control PRO 8-120 3-8S -120(150)A 5-8,4V/10(30)A Switch BEC ESC

Product number: 8740

€79.99*

Not in stock. Available in approx. 2 to 6 months.

Privacy

  • Ro-Control 8-120 V2
  • NO Plug battery side
  • Plug motor side: 4mm gold contact
  • printed manual in D
  • Instructions EN / FR for download


Cells (LiPo): 3-8
Current duration (A): 120
Max current (A): 150
Weight (g): 117
BEC: 5/6/7,4/8,4V / 10(30)A
Length (mm): 83
Type: Brushless
Wide (mm): 35
Height (mm): 22
BEC or OPTO: BEC

The Ro-Control V2 series has been further expanded with this new 120A controller. Numerous features such as the built-in 32-bit microprocessor, with a running frequency of up to 96 MHz, as well as programmable functions such as brake type, braking force, HV BEC output voltage, cut-off voltage, LiPo cell setting, start-up and search mode and, of course, timing and active freewheeling have been implemented.

Reverse brake
With activated reverse brake and linear reverse brake mode, the landing distance of the aircraft can be effectively shortened to simulate the landing of a real aircraft.
Normal Brake Mode and Brake Disabled Mode are also available;
In normal brake mode, the braking force is adjustable.

Of course, these controllers are also subject to strict quality assurance to ensure maximum safety and fun. The Ro-Control V2 controllers are particularly suitable for our Robbe ARF and PNP models, but also for many other aircraft.

Features

- Compatible with a wide range of brushless motors
- Integrated 32-bit microprocessor
- BEC voltage programmable 5V, 6V, 7.4V and 8.4V
- Equipped with DEO (Driving Efficiency Optimisation) technology to improve throttle response and reduce controller temperature
- Effectively reduce the landing distance of the aircraft with the programmable brake modes
- Various protection mechanisms such as undervoltage cut-off, overheating protection and throttle signal loss protection
- Simple programmeable with the LED programming card 8720 or by the transmitter


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]