The Robbe Ro-Control LITE programming card is a one-button programming aid for the Ro-Control LITE 85A controller.
It is deliberately kept simple and is very easy to use.
Its dimensions are so small that it fits in any transmitter case.
Progcard use:
1. Connect the ESC signal wire into the ESC plug.
2. Connect a power battery to the ESC via the battery input leads.
3. Connect a battery (4-6V) to the Batt. plug if the ESC hasn't BEC function.
4. Lights indicate the current settings of each feature.
5. Cycle through the features with the Select button.
6. Click twice to change the parameter, click once to move on.
7.If the present setting is RESET, double click and restore to manufacture defaults.
Adjustable parameters:
BRAKE, motor brake ‘OFF/ON’
CUT OFF TYPE Cut-off in case of undervoltage ‘Slowly reduce motor speed/switch off’
CUT OFF VOLTAGE Cut-off in case of undervoltage "At low, medium, high cell voltage
BEC VOLTAGE ‘6V/8V’ Output voltage to receiver
BATT TYPE ‘Li-XX/NIXX’ for Lipo or NiMh batteries
START MODE ‘Normal/slow/very slow’ Motor start-up
TIMING MODE ‘Low/medium/high’ Depending on motor specifications
RESET Reset to factory settings
