Robbe Modellsport RO-CONTROL 6-85 LITE 3-6S-85(100A) (6)8V 7A S-BEC, XT-90/4mm gold plugs
Product number:
8745
- Ro-Control 6-85 LITE
- Connector battery side: XT-90
- Connector motor side: 4 mm gold plug
- Printed manual in German
- Manual EN / FR available for download
| Cells (LiPo): | 3-6 |
|---|---|
| Current duration (A): | 85 |
| Max current (A): | 100 |
| Weight (g): | 72 |
| BEC: | 6(8)V/7A |
| Length (mm): | 81 mm |
| Type: | Brushless |
| Wide (mm): | 30,5 |
| Height (mm): | 11 |
| BEC or OPTO: | BEC |
The RO-CONTROL LITE from Robbe comprises professional controllers for aeroplanes with the best and most reliable performance. This controller is aimed at experienced pilots who place great value on performance and quality.
RO-CONTROL “LITE” 6-85 is a modern speed controller for a voltage range of 3-6S LiPos and 85A, with a short-term load capacity of up to 100A. It can be used to operate almost all commercially available brushless motors, including high-speed 2-pole motors with up to 210,000 rpm. Start mode can be set from “normal” to ‘soft’ to “super-soft.” The same applies to the shutdown mode (power reduction, shutdown) and braking force. Safety features include low voltage shutdown, overheating protection, and auto-startup in case of signal loss. The speed curve is smooth and even across the entire stick travel. It can be easily calibrated to different transmitters. The powerful UBEC also supplies high-performance servos in HV mode to meet modern requirements. The parameters can be easily set using an optional programming card.
RO-CONTROL “LITE” 6-85 is a modern speed controller for a voltage range of 3-6S LiPos and 85A, with a short-term load capacity of up to 100A. It can be used to operate almost all commercially available brushless motors, including high-speed 2-pole motors with up to 210,000 rpm. Start mode can be set from “normal” to ‘soft’ to “super-soft.” The same applies to the shutdown mode (power reduction, shutdown) and braking force. Safety features include low voltage shutdown, overheating protection, and auto-startup in case of signal loss. The speed curve is smooth and even across the entire stick travel. It can be easily calibrated to different transmitters. The powerful UBEC also supplies high-performance servos in HV mode to meet modern requirements. The parameters can be easily set using an optional programming card.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]