Robbe Modellsport RO -CONTROL 4-30 V2 3-4S -30(50)A 5V/5A Switch BEC controller
Product number:
8743
€17.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
- ro-control 4-30 V
- Battery side connector: XT-60
- Motor side connector: 3.5 mm
- Printed instructions in German
- Instructions in English/French available for download
| Battery-side connector: | XT-60 |
|---|---|
| Cells (LiPo): | 3-4 |
| Current duration (A): | 30 |
| Engine-side connector: | 3,5mm Goldkontakt |
| Max current (A): | 50 |
| Weight (g): | 33 |
| BEC: | 5V/5A |
| Length (mm): | 60 |
| Type: | Brushless |
| Width (mm): | 25 |
| Height (mm): | 8 |
| BEC or OPTO: | BEC |
The ROBBE Ro-Control V2 series is the further development of the proven predecessor series. As before, it is an affordable and easy-to-use controller series for brushless motors.
Thanks to the use of high-quality SMD components, the internal resistance of the controllers is particularly low. Thanks to the high clock frequency, the Ro-Control V2 controllers have a very sensitive control response. All controllers have an adjustable brake with reverse function, battery type selection, timing setting, undervoltage cut-off, temperature and overcurrent protection, soft start and a search mode. Naturally, the entire series is equipped with effective start-up protection if the throttle stick on the transmitter is not set to motor-off when switching on.
Thanks to the use of high-quality SMD components, the internal resistance of the controllers is particularly low. Thanks to the high clock frequency, the Ro-Control V2 controllers have a very sensitive control response. All controllers have an adjustable brake with reverse function, battery type selection, timing setting, undervoltage cut-off, temperature and overcurrent protection, soft start and a search mode. Naturally, the entire series is equipped with effective start-up protection if the throttle stick on the transmitter is not set to motor-off when switching on.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]