Robbe Modellsport FS 1015X Mini HV MG Digital Servo E4020, 744B
Product number:
9143
| Bearing: | •• |
|---|---|
| Servo Speed sec./60° (4,8V) HV: | 0,14 |
| Servo Speed sec./60° (6V) HV: | 0,13 |
| Servo Speed sec./60° (7,4V) HV: | 0,12 |
| Servo Speed sec./60° (8,4V) HV: | 0,1 |
| Servo Torque kg/cm (4,8V) HV: | 6 |
| Servo Torque kg/cm (6V) HV: | 8 |
| Servo Torque kg/cm (7,4V) HV: | 9 |
| Servo Torque kg/cm (8,4V) HV: | 9,6 |
| Gearbox Type: | Metal |
| Weight (g): | 25 |
| Length (mm): | 30 |
| Width (mm): | 10 |
| Height (mm): | 35 |
| Servo-type: | High Voltage |
| Gear tooth: | 25Z/4,93mm |
| Betriebspannung (V) HV: | 4,8 - 8,4 |
The Robbe FS 1015X Mini is an extraordinarily strong, robust and flat wing servo in a compact, CNC-milled aluminium housing with milled cooling fins for better heat dissipation. It has a stable yet backlash-free metal gearbox and ball bearings on the output. The FS 1015X Mini has an enormously high actuating force of 12 kg/cm at 8.4 volts and can therefore be used on ailerons and flaps in electric and glider models with a wingspan of up to 6 metres. But it can also be used in modern hotliners or gliders of classes F3B/F3F, etc., where high forces are required, thanks to its small dimensions. The FS 1015X Mini is compatible with the KST X10 Mini.
The new Robbe X series servos are precision-manufactured high-voltage digital servos in various sizes for different applications in RC modelling.
They have CNC-milled aluminium housings with cooling fins for better heat dissipation and robustness, metal/steel gears for low backlash and high positioning precision, high-quality ball bearings, coreless- or brushless motors, high protection against external influences (IP56/67) and a soft start function that moves the servos slowly and gently to the neutral position when they are switched on.
These features ensure a long and reliable service life for the servos and therefore also for your models.
The new Robbe X series servos are precision-manufactured high-voltage digital servos in various sizes for different applications in RC modelling.
They have CNC-milled aluminium housings with cooling fins for better heat dissipation and robustness, metal/steel gears for low backlash and high positioning precision, high-quality ball bearings, coreless- or brushless motors, high protection against external influences (IP56/67) and a soft start function that moves the servos slowly and gently to the neutral position when they are switched on.
These features ensure a long and reliable service life for the servos and therefore also for your models.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]