- Model BOO in ARF construction, pre-covered
- Fiberglass fuselage with canopy in carbon look
- Assembly jig
- Small parts for control linkages
- Various screws and nuts
- Fiberglass wing joiner
- Fiberglass milled parts
- Decal set
- Comprehensive illustrated manual in German, English and French
| Wing-span (mm): | 800 |
|---|---|
| Flight weight approx. (g): | 170 |
| Control: | Ailerons, Elevator, Rudder |
| Length (mm): | 485 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | GFK |
| Wings: | Wood/rib construction |
| Rec. Battery: | 2S/240-320mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Without |
Thank you for choosing the micro fun glider with an 800 mm wingspan for slopes, dikes, or dunes. Small in size but designed for big fun. With its transport-friendly dimensions, it can even fit into your hand luggage on a plane or simply on the parcel shelf in your car. The model promises enjoyment in a compact package.
In addition to the well-known kit version of the Boo model, there is now an ARF version that is largely pre-assembled. The wooden construction remains the same as in the kit. Final assembly takes place on a building jig, allowing for precise alignment of all components. The wing is detachable, and the V-tail can be easily removed, making the model very transport-friendly.
Recommended RC Equipment: • 4-channel transmitter with dual-rate and expo
- Micro receiver with normal range (e.g., JETI R5L / Futaba R2106GF)
- Sub-micro servos, 8 mm thick, 4x DIGITAL HV Servo FS-135 X #9128
- Battery, LiPo 2S, 200 – 400 mAh, 7.4V, Robbe Ro-Power #7317 or #7313
Required Tools: • Building board
- Instant glue “Speed” (thin and medium viscosity) #5062 / 5063
- Activator spray #5017
- Glue stand #50610
- Epoxy glue, e.g., Ro-Poxy #50600
- Control throw gauge #50611
- M3 tap
- Various pliers and screwdrivers
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]
Robbe Modellsport Boo slope glider ARF purple in innovative plywood construction
€259.99
In stock. Usually ships within 1 business day.
Content: 0.2 kg (€78.00 / 1 kg)
- Model BOO in ARF construction, pre-covered
- Fiberglass fuselage with canopy in carbon look
- Assembly jig
- Small parts for control linkages
- Various screws and nuts
- Fiberglass wing joiner
- Fiberglass milled parts
- Decal set
- Comprehensive illustrated manual in German, English and French
| Wing-span (mm): | 800 |
|---|---|
| Flight weight approx. (g): | 170 |
| Control: | Ailerons, Elevator, Rudder |
| Length (mm): | 485 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | GFK |
| Wings: | Wood/rib construction |
| Rec. Battery: | 2S/240-320mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Without |
Thank you for choosing the micro fun glider with an 800 mm wingspan for slopes, dikes, or dunes. Small in size but designed for big fun. With its transport-friendly dimensions, it can even fit into your hand luggage on a plane or simply on the parcel shelf in your car. The model promises enjoyment in a compact package.
In addition to the well-known kit version of the Boo model, there is now an ARF version that is largely pre-assembled. The wooden construction remains the same as in the kit. Final assembly takes place on a building jig, allowing for precise alignment of all components. The wing is detachable, and the V-tail can be easily removed, making the model very transport-friendly.
Recommended RC Equipment: • 4-channel transmitter with dual-rate and expo
- Micro receiver with normal range (e.g., JETI R5L / Futaba R2106GF)
- Sub-micro servos, 8 mm thick, 4x DIGITAL HV Servo FS-135 X #9128
- Battery, LiPo 2S, 200 – 400 mAh, 7.4V, Robbe Ro-Power #7317 or #7313
Required Tools: • Building board
- Instant glue “Speed” (thin and medium viscosity) #5062 / 5063
- Activator spray #5017
- Glue stand #50610
- Epoxy glue, e.g., Ro-Poxy #50600
- Control throw gauge #50611
- M3 tap
- Various pliers and screwdrivers
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]