Robbe Modellsport Scirocco XL 4.5m ARF (White) Full Carbon High-performance glider with 4-flap wing
Content: 0.1 kg (€119.90* / 1 kg)
- Model SCIROCCO XL in full-carbon design, multi-coloured lacquered in form
- Carbon square socket
- incidentals
- Assembly instructions in German/English/French
| Wing-span (mm): | 4500 |
|---|---|
| Flight weight approx. (g): | 4480 |
| Control: | Ailerons, Elevator, Flaps, Motor Powered, Rudder |
| Length (mm): | 1710 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | CFK/Aramid |
| Wings: | Carbon/FiberGlass |
| Rec. engine: | Ro-Power Torque 4356-600k/v BRUSHLESS |
| Rec. Battery: | 5S/4200mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Airfoil: | HN-354 |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
At your request, we have developed here a larger version of our Scirocco.
With its 4.5m wingspan, it is much more suitable for thermals than its predecessors. The Scirocco XL full-carbon is a high performance glider model in modern GRP/CFRP shell construction with very high strength. The H-shaped main spar in sandwich construction made of Airex as support material with laminated carbon fiber fabric has been significantly reinforced. Suitable for the hobby pilot who is looking for an all-round glider with a focus on thermal flight, but still does not want to miss out on light aerobatics like rolls, loops, turns, etc. The elaborate shapely design allows as usual excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.
The model is available in two versions (ARF/PNP+) and is largely pre-assembled in the PNP+ version.
The Ro-Power Torque 4356 motor, ESC, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the PNP+ version, so that the construction effort is reduced to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.
Features:
- large wingspan of 4.5m
- 3-piece wing
- solid sandwich CfK/Airex spar
- significantly increased thermal characteristics
- continuous ailerons/flaps (no web anymore)
- Installation of black interchangeable frames for the 6-pin connectors provided in mold (already installed in PNP)
- Molded WK linkage covers
- separating groove for Multilock system in form
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]
The new Scirocco “XL” full-carbon...
...is the enlarged and further developed version of our successful Scirocco “L” model, now even available in a full-carbon version!
At your request, we have developed here a larger version of our Scirocco.
With its 4.5m wingspan, it is much more suitable for thermals than its predecessors. The Scirocco XL full-carbon is a high performance glider model in modern GRP/CFRP shell construction with very high strength. The H-shaped main spar in sandwich construction made of Airex as support material with laminated carbon fiber fabric has been significantly reinforced. Suitable for the hobby pilot who is looking for an all-round glider with a focus on thermal flight, but still does not want to miss out on light aerobatics like rolls, loops, turns, etc. The elaborate shapely design allows as usual excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.
The model is available in two versions (ARF/PNP+) and is largely pre-assembled in the PNP+ version.
The Ro-Power Torque 4356 motor, ESC, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the PNP+ version, so that the construction effort is reduced to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.
Features:
- large wingspan of 4.5m
- 3-piece wing
- solid sandwich CfK/Airex spar
- significantly increased thermal characteristics
- continuous ailerons/flaps (no web anymore)
- Installation of black interchangeable frames for the 6-pin connectors provided in mold (already installed in PNP)
- Molded WK linkage covers
- separating groove for Multilock system in form
