Robbe Modellsport Monsun V3 ARF styro/fibreglass/abachi wing, white fuselage
€649.99*
Not in stock. Available approx. from 28.08.2026 to 27.09.2026.
Content: 0.2 kg (€78.00* / 1 kg)
- Monsun V3 model largely prefabricated
- In mold painted fiberglass/carbon fuselage
- Ready-made covered Styro/GRP/Abachi wing
- Ready-made covered, removable T-tail made of balsa
- Small parts (rudder horns, linkages, clevises, ball heads, covers, etc.)
- Assembly instructions in German/English/French
| Wing-span (mm): | 3000 |
|---|---|
| Flight weight approx. (g): | 2950 |
| Control: | Ailerons, Elevator, Flaps, Motor Powered, Rudder |
| Length (mm): | 1480 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | CFK/GFK |
| Wings: | Styro/Fiberglass/Abachi |
| Rec. engine: | Ro-Power Torque 3526-870kv |
| Rec. Battery: | 4S/4200mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Airfoil: | HQ 2,5/9 |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
In addition, the MONSUN V3 PNP+ now comes with a built-in Ro-Control LITE 85A controller, which supplies the six built-in FS-82 HV MG soft-start servos with a constant 8V BEC voltage.
It is a thermal and all-round glider in the compact 3m class with a 4-flap wing. The T-tail is linked without play by a directly built-in servo.
The flight characteristics can be described as very good-natured. The MONSUN V3 can be flown as a slow thermal glider or as an all-rounder at a slightly faster speed.
The ready-covered wings are constructed from a styrofoam core, fibreglass layers, abachi planking and a carbon fibre-reinforced spar.
The ratio of weight to strength has been optimised.
The MONSUN V3 is suitable for beginners as well as advanced model pilots.
Features:
- Two-piece, pre-covered Styro/GRP/Abachi wing with CFRP spar
- Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
- Built-in Robbe FS-82 HV MG ECO digital servos with soft start, ball bearings and metal gears (PNP+ only)
- Pre-wired servos with MPX 6-pin connectors between wing and fuselage (PNP+ only)
- Pre-mounted ailerons with rudder horns
- New, reinforced and mould-painted GRP fuselage with built-in frames and CFRP reinforcements
- Powerful Ro-Power 3526 870 K/V external rotor motor, optimised for 4S (PNP+ only)
- Built-in Ro-Control LITE 85A controller with HV BEC (PNP+ only)
- Large canopy for convenient battery replacement and easy RC installation
- Pre-hinged rudder flaps
- Pre-assembled control rods with linkage parts manufactured in Germany
- Pre-cut servo shaft and linkage covers
- Anodised 38 mm aluminium spinner (PNP+ only)
- High-strength Falcon carbon fibre propeller 12x8" (PNP+ only)
- Modern, highly visible design
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]