Robbe Modellsport K-Rat II Pro ARF GFRP 2,0m Compact-Allrounder with 2 flap wing
Product number:
2704
€699.99*
No new delivery date is known. Please register for the stock notification below. As soon as we receive new information, you will be notified.
- Model K-Rat II Pro in full GFRP construction, in mold multicolor painted
- 10mm CFRP coving
- Small material
- Assembly instructions in German/English/French
| Wing-span (mm): | 2000 |
|---|---|
| Flight weight approx. (g): | 1650 |
| Control: | Ailerons, Elevator, Motor Powered, Rudder |
| Flächeninhalt (dm²): | 31 |
| Length (mm): | 1140 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | GFK |
| Wings: | Fiberglass/Carbon |
| Rec. engine: | Ro-Power Torque 3546 760 k/v BRUSHLESS |
| Rec. Battery: | 4S/2300-2800mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Airfoil: | Robbe Spezial |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
The K-RAT II PRO is the successor to the successful and widely used K-RAT II in full GRP construction. The new ‘PRO’ model fulfils the latest requirements in terms of construction and aerodynamic design, as well as high strength. The model is suitable for high-speed flights, aerobatics and feels just as comfortable in thermals (thanks to controlled rudder) as it does as a fun and training model. Due to the balanced and good-natured flight characteristics, even those switching from 2-axis to 3-axis models will find the perfect model. Not only the less experienced, but also the ambitious model pilot gets an all-round model for almost every weather situation and area of use. The K-RAT II PRO can be flown as a preliminary stage to hotliners.
The model has some outstanding detailed solutions, such as a separate servo slot on the underside of the fuselage for the elevator and rudder servos, wings that can be attached to the side using a 10 mm CFRP round bar, wing locking via ‘Multilock’ and a very high degree of prefabrication overall, especially in our PNP version, as only the required battery, controller and receiver need to be installed. The ARF version is also largely prefabricated and can therefore be assembled quickly using your own components.
The model has some outstanding detailed solutions, such as a separate servo slot on the underside of the fuselage for the elevator and rudder servos, wings that can be attached to the side using a 10 mm CFRP round bar, wing locking via ‘Multilock’ and a very high degree of prefabrication overall, especially in our PNP version, as only the required battery, controller and receiver need to be installed. The ARF version is also largely prefabricated and can therefore be assembled quickly using your own components.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]