Robbe Modellsport EVOA 3.0 "X" PNP+ FULL-GRP "Electric" HIGH PERFORMANCE GLIDER WITH 4-FLAP WING
Product number:
2733
€1,849.99*
Not in stock. Available approx. from 01.10.2026 to 30.12.2026.
Robbe Modellsport RO-SAFETY LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY
€75.99*
€79.99*(5% saved)
- Model EVOA 3.0 X in full GRP/CFRP construction, in mold multicolor painted
- CFK coving
- Ro-Power Torque X-36 Brushless, mit 800KV motor installed
- RO-CONTROL 6-85 LITE 3-6S -85(100A) 8V/7A switch BEC ESC installed
- Spinner 38mm installed
- propeller 12x8" installed
- 2x FS-806X HV servos installed
- 4x FS-1015 X servos installed
- small material
- Assembly instructions in German/English/French
| Wing-span (mm): | 3000 |
|---|---|
| Flight weight approx. (g): | 3200 |
| Control: | Ailerons, Elevator, Flaps, Motor Powered, Rudder |
| Length (mm): | 1500 |
| Manufacturer: | Robbe Modellsport |
| Fuselage: | Carbon/FiberGlass |
| Wings: | Fiberglass/Carbon |
| Rec. engine: | Ro-Power Torque X-36 800KV Brushless |
| Rec. Battery: | 4S/3200-4000mAh LiXX |
| Version: | PNP+ - PLUG N PLAY |
| Airfoil: | HQ/W2,5-9 |
| Flight Skill: | Professional |
| Build Skill: | Beginners |
| Drive Type: | Electric |
Our new all-rounder Star is called EVOA 3.0 X with a new X-design!
It has a very compact and transport-friendly size with its 3.0 m wingspan and the two-part wing, which is attached to the side of the fuselage. The wing load is transmitted via a large CFRP spar connector. The EVOA is manufactured using the latest full GRP or full carbon sandwich construction and has many carbon fiber reinforcements in the critical areas. The wing is designed as a typical 4-flap wing with ailerons and flaps, which are classically cross-hinged. The lateral axis is stabilized and controlled via a laterally pluggable pendulum elevator using a bellcrank. The flight characteristics can be described as more than just good-natured, especially due to its low weight. It can be circled slowly and comfortably in thermals, but can also be flown somewhat more sportily in dynamic aerobatics.
The model is available in two versions (Electric FULL GRP & FULL CARBON, each as ARF/PNP+) and is largely pre-assembled in the PNP+ version.
The Ro-Power Torque X-36 motor, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the electric PNP+ version, so that the construction effort is reduced to a minimum.
In the ARF version of both versions, you have the option of using individual RC components at your own discretion.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]