Robbe Modellsport AMPLITUDE ARF FULL GRP/CFRP HOTLINER
€479.99
No new delivery date is known. Please register for the stock notification below. As soon as we receive new information, you will be notified.
Content: 0.1 kg (€119.90 / 1 kg)
Content: 0.09 kg (€122.11 / 1 kg)
- Amplitude ARF full GRP model
- Carbon/Fiberglass fuselage
- Carbon/Fiberglass wing
- Carbon/Fiberglass tailplane
- Small parts (rudder horns, clevises, linkages, covers, etc.)
- Instructions in German/English/French
| Wing-span (mm): | 1800 |
|---|---|
| Flight weight approx. (g): | 1590 |
| Control: | Ailerons, Elevator, Flaps, Motor Powered |
| Length (mm): | 1040 |
| Manufacturer: | Robbe |
| Fuselage: | Carbon/FiberGlass |
| Wings: | Fiberglass/Carbon |
| Rec. engine: | Robbe X36-800 |
| Rec. Battery: | 4S/3200-4000mAh LiXX |
| Version: | ARF - ALMOST READY TO FLY |
| Airfoil: | MH-30 |
| Flight Skill: | Advanced |
| Build Skill: | Advanced |
| Drive Type: | Electric |
In addition to the ailerons, the carbon-fibre reinforced wing also has flaps that are cross-jointed. This allows both the manoeuvrability and the slow flight characteristics to be optimized. Landing is child's play with the butterfly position, even in tight spaces.
All rudders are attached as elastic flaps.
The fuselage is extremely spacious under the wing to accommodate larger batteries for high performance propulsion. Transverse and longitudinally laminated CfK reinforcements ensure high strength.
With the drive of the PNP version, breathtaking climbs are achievable.
In the ARF version own drive setups can be used.
Low overflights at high speed are spectacular and demonstrate the performance of the model.
However, the AMPLITUDE can also be flown softly and is quite happy to accept updrafts. Thus, the model is also suitable for more comfortable all-round operation.
The AMPLITUDE is available in two versions (ARF and PNP). With the PNP version, the drive is already installed, as are all the servos and the cabling.
Features:
- large-volume fuselage for large batteries
- 4 flap wings with flaps!
- eye-catching modern design with extremely good recognizability
- very many CfK reinforcements, therefore high strength
- three M3 flat head screws with the same wrench size
- length 1,04m
- Profile: MH-30
- 4 flap wings (ailerons and flaps)
- Empty weight approx. 725g
- Flight weight approx. 1590g
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]